"> [Official][ROM] HTC One A9 Stock Rom For US AT&T / Cricket – ForDroid
Home Stock rom [Official][ROM] HTC One A9 Stock Rom For US AT&T / Cricket

[Official][ROM] HTC One A9 Stock Rom For US AT&T / Cricket

by Ucup Budug
216 views

HTC One A9 Stock Rom For AT&T / Cricket

 

You can use these original stock firmware files to :

    • Updates HTC One A9
    • Unbrick HTC One A9
    • Downgrade HTC One A9
    • Restore HTC One A9 to 100 % stock factory
    • Repair solutions for HTC One A9 if boot loop, Hardbrick, Lost recovery, or can’t boot to home screen, attacked by virus, etc.

Please note: ROM Downloads are not available for Verizon Wireless Devices. However select Verizon Wireless devices can be updated using the HTC Sync Manager software. Download HTC Sync Manager .

WARNING : If your Bootloader or device software has been modified, you may run the risk of damaging your device by installing the RUU.

 

For Carrier : AT&T / Cricket

File name : RUU_HIA_AERO_UL_M60_SENSE7GP_ATT_Cingular_US_1.27.502.5.exe

Firmware Version : 1.27.502.5

File size : 1.8 GB

DOWNLOAD

This software upgrade available for your HTC One A9 provides the following key enhancements:

  • Battery improvements
  • Camera improvements

Details

Before you proceed, please confirm that this software upgrade to 1.27.502.5 is a newer version than what is currently loaded on your device. If it is the same version, there is no need to reload the software. Navigate to the Home screen, then tap All apps > Settings > About and locate the Software information . If your Software number is less than 1.27.502.5 , you should proceed with the upgrade.

WARNING:

During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger or long-press the Power button as this might stop the update and your device may be rendered inoperable!

Getting Started

Before you proceed with the update, make sure you have done the following:

  • Set aside approximately 20 minutes to allow the device to update
  • Connect the device to a charger
  • Ensure the battery is charged to at least 35%
  • Ensure the device is connected to AT&T 4G/LTE and a stable Wi-Fi network

Installation instructions

To download and install the update from the device, follow these steps below:

  1. Follow the “Getting Started” steps above.
  2. From the Home screen tap All apps , tap Settings .
  3. Tap AT&T s oftware update .
  4. Tap Check for updates .
  5. Tap Continue to download the update.
  6. If downloading the update using the mobile data network (not connected to Wi-Fi), you may be prompted with a data fee warning message. If this is acceptable, tap YES to start the upgrade process.
  7. The status of the download can be checked in the Notifications pull down.
  8. Once the download is complete, the user will be prompted to install from the Notifications pull down. Tap the System update to begin the upgrade process.
  9. Tap OK to begin the update process to software version 27.502.5 .

WARNING:

During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger or long-press the Power button as this might stop the update and your device may be rendered inoperable!

  1. The device will reboot and begin installation. Users will not be able to use their device during the installation process (approximately 10 minutes).
  2. Once the system update is complete, tap OK to continue.
  3. For best performance, open Play Store and tap the Menu icon, then select My apps and ensure all installed apps are updated.

Manual system update instructions:

If you are outside of AT&T/Wi-Fi coverage, or the update is not found, you may perform a manual system update via USB connection to a PC. This process requires that you download and install HTC Sync Manager first in order to get the proper drivers. If you do not have HTC Sync Manager installed already, you may download the software from https://www.htc.com/www/software/htc-sync-manager/ .

WARNING :

Performing the system update manually will delete all information from the device. Ensure all information is backed up before proceeding. See the Help & How To section of this website for more information on backing up your device contents.

Performing the ROM Update:

  1. Download and save the HTC One™ ROM update to your PC.
  2. Connect your device to your PC via the supplied USB cable.
  3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
  4. Once the device is properly recognized on the PC, locate the HTC One™ ROM Update that you downloaded. Double-click on the file to launch the system update wizard.
  5. Follow all of the system update wizard instructions shown on your PC.
  6. Once the update is complete, click Finish in the Wizard and the device will reboot.
  7. Once the device reboots, the initial setup wizard will appear.
  8. After the initial setup process is complete, open Play Store and tap the Menu icon, then select My apps and ensure all installed apps are updated.
  9. After initial setup and updating all apps, the device is ready for use.

Note : If the ROM update wizard fails to recognize the device, close the wizard and then follow the steps below:

  • From a powered off state, hold VOLUME DOWN while powering on the device to access download mode.
  • Connect the device to the PC while in this state and attempt the ROM update again.

To exit download mode manually, use the volume keys to navigate to reboot and press the POWER button to select it.

Image source : GSMarena

HTC One A9 OS Android OS v6.0.1 (Marshmallow)
Chipset Qualcomm MSM8952 Snapdragon 617
CPU Quad-core 1.5 GHz Cortex-A53 & quad-core 1.2 GHz Cortex-A53
GPU Adreno 405

You may also like

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More